Sanyo FVD40P4 LED TV Review
A punchy picture that glosses over details—yep, you get what you pay for.
As you might expect, the Sanyo FVD40P4 (MSRP $268) is not unlike its cousin, the FVD48R4. Unfortunately, the latter failed to impress us during testing, so that's not exactly a ringing endorsement.
The P4's got a small leg up on the R4 from a design standpoint, but it still lacks even the most basic picture customization options and brings nothing to the table performance-wise. It'll work in a pinch, but has a myriad of performance issues that any discerning viewer will notice.
A 40-inch TV for under $300 is nothing to scoff at, but you should only buy the FVD40P4 if your top priority is to spend as little money as possible on your next TV. If picture quality is at all important to you, then the P4 should probably not be on your wishlist—you can find better TVs out there for just a little more money, after all.
The Looks & Experience
Bare-bones, but enough for basic needs
If there's one thing that stands out about the FVD40P4, it's that it's much more heavily kitted-out than bare bones LED TVs from years past. For what you're paying, you get a decent spread of connectivity options—HDMI inputs, component/composite hookups, USB, coaxial for cable, and analog audio inputs. Additionally, while it's not quite a smart TV, the P4 does give you access to Roku functionality via a scannable QR code that pops up when you push the "smart" button on the remote.
Otherwise, things are as simple as you'd expect for such an affordable set. This TV isn't particularly thin or stylish, though the flat, glossy stand is an improvement upon the flimsy plastic of yesteryear. Black bezels wrap the screen, which is disappointingly reflective, and doesn't swivel or move upon its neck.
The menu is equally dressed down, featuring the most basic picture options for Backlight, Contrast, Brightness, and Color, as well as the usual settings for audio modes, sleep timers, and language selection. In the box, you'll find a simple, lightweight remote with plenty of buttons and a full number pad. The P4 is also VESA wall-mount compliant, though it's a little thick for that task compared to modern LED TVs.
Bright and punchy, but unsuitable for attentive viewers
Modern LCD TV engineering has come a long way in the last decade, but the Sanyo FVD40P4 didn't get the memo. That's not to say it looks terrible, but it certainly won't suit anyone looking for a high-quality experience.
Testing revealed decent color accuracy, but a definite loss of important shadow and highlight details. While the TV boasts good contrast—nice dark shadows and a bright output—it makes the mistake of crushing details in the lower and upper echelons of the picture, which really detracts from uncompressed content like a Blu-ray. We watched a few scenes from Looper, and the lack of finer details was quite obvious compared to other sub-$1,000 TVs.
Because it's a 60 Hz refresh rate panel, the P4 is fine for most movie and TV content in terms of resolution retention during motion, but shouldn't be used by serious gamers. We didn't notice too much blurring or smearing during content, but the TV also lacks any of the now-common motion compensation modes that most manufacturers provide, meaning fast-action content like broadcast sports don't always look as crisp as they could.
The P4's biggest problem, however, is that its white balance (the "color" of neutral tones) leans very heavily towards blue. This isn't uncommon, but usually, the menu contains a few controls for correcting the issue. Without these controls, you're basically stuck with how things look out of the box. We also noticed mild but considerable backlight bleed, with cloudy spots towards the center of the screen, indicating sub-par build quality.
You could get by using this TV as a guest room set, in the kids' room, or in a very bright space like a kitchen, but the loss of details and the skewed white balance are going to look very bad—and wear on your eyes—if you watch in dimmer or darker, movie-appropriate environments.
On the lower end of the spectrum, but at least it's priced as such.
There's really no way around it: The FVD40P4 is not a viable option for anyone who is truly concerned about the quality of their TV's picture. If you're buying a main TV for your living room? There are simply better options for essentially the same price.
That said, the price is pretty hard to argue with, and there are very few 40-inch TVs available in this part of the market. But if you can spare around $50-75 more you'd be better off sinking a little extra money into something like the 39-inch LG LB5600, which can currently be found online for $369.99. Slightly older Vizio E-series sets can also be found at this size for right around $300 flat.
But if you've already got a main set and just want something for a second room, then this isn't a bad option. You can do better, but you can also do a whole lot worse. The FVD40P4 may not be the TV of your dreams, but at least you won't wake up having spent a lot of money.
Get Our Newsletter
Real advice from real experts. Sign up for our newsletter
Thanks for signing up!